If Your Hot Water System Fails: Quick Response Plan
If Your Hot Water System Fails: Quick Response Plan
Blog Article
We've come across this great article on What Would Cause My Electric Water Heater to Stop Working? listed below on the web and felt it made good sense to talk about it with you in this article.
Several modern-day houses utilize an electric water heater for their heating system, as a result of its comfort and also simplicity of use. Nonetheless, just like any other electrical devices, troubles might occur with its use, unexpectedly. It can be truly frustrating to wake up to a cold shower as opposed to a hot one or having your bathroom with water that isn't hot adequate and even too hot. Whatever the situation might be, hot water heater issues can be fairly aggravating. Fortunately, we have actually made a list of feasible remedies to your hot water heater problems. There are a variety of variables that could trigger many of these troubles, maybe a concern with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you switch off the major power supply for safety. Whatever the trouble is, getting it dealt with ought to not position way too much of a problem if you follow these steps:
Call A Specialist:
If after replacing all defective parts and resetting your temperature level, the water heater still isn't functioning, you might need to call a specialist plumber for a specialist viewpoint. The issue with your heater could be that the cold and hot faucets have been switched over or it may be undersized for the amount of hot water required in your house. Whatever the case might be, an expert plumber would certainly help resolve the trouble.
Inspect Your Power Supply:
As fundamental as this may appear, it is very needed. Without adequate power, your water heater will not operate. So the first thing to do when your water suddenly retires is to verify that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the breaker is the problem, merely turn it on and off once more. Change any damaged or worn-out fuse. Test the home appliance with power after these modifications to see if it's now functioning.
Examine Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot enough, you might require to examine the temperature level settings on your upper thermostat. Make sure the breaker is switched off prior to doing anything. Open the access panel and also press the red switch for temperature level reset above the thermostat. This should help heat up the water. Turn the breaker back on and also check if the issue has actually been resolved.
Inspect the Heating Element in the Water Heater:
If it's not a power problem, then try having a look at your heating element if it is still working. Evaluate each of your heating elements to make sure the problem isn't with any one of them. If any of them is damaged, change that part and afterwards check whether the hot water is back on.
Verdict
Water heater problems are not always significant. Much of them result from minor problems like a blown fuse or damaged burner. Replacing the defective components need to do the trick. Nonetheless, if you are still not able to address the trouble, give a call to your nearest plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our section on How to Troubleshoot and Repair an Electric Water Heater. Thanks for taking the time to read our piece. Enjoyed reading our content? Please share it. Let other people find it. Many thanks for your time. Please check up our blog back soon.
Estimate Free Report this page